The Stability Bar S is needed when the mezzanine cannot be fixed to 2 or more walls.
The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.
The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.
The K-bracing system (shown in the left) is as safe as the classic cross-bracing system. Moreover, our K- bracing system allows to pass freely underneath the mezzanine.
Warning: Last items in stock!
|Kind of product||Stability kits|
|Material and finish of the posts||Steel painted with powder coating|
|Which height above the flooring board is needed?||From 160 to 173 cm, From 173 to 209 cm, From 209 to 233 cm|
Very good funcionality but design could be prettier
The stabilizers work very well and are very easy to fix. We already knew and accepted that it wasn´t the best solution from an aesthetics point of view but we felt that the overall design could have attempted to minimize this, for example by tapering both ends. However they do the job.
Gives stability to the structture
Our mezzanine is self standing; the stability bars (we installed two sets) give it much needed stability. Though it is a bit tricky to install and doesn't stop the mezzanine from shaking slightly when we are on it, it is definitely much required.
Kit de stabilité
Je recommande dans tout les cas ce kit. Il aide vraiment à stabiliser l'ensemble de la structure.