These height-adjustable stairs are suitable for access to the S mezzanines. They can also be used in other placesm¡, thanks to the very versatile anchorage system.
These stairs can be placed on either side of the mezzanine, either parallel or perpendicular to the structure (facing the beams). They can also be installed inside the mezzanine as long as theT8 Hollow for Interior Stairs is used
There is no handrail for these stairs since they are intended to be installed between the mezzanine structure and a wallThis stair doesn´t have handrail since it is thought for its installation between the mezzanine and the wall. Ask Tecro if you wish to install the stairs in a different location.
The small landing at the top has a height of 42,5cm. It provides easy access to the mezzanine floor and is a great space-saver. The stairs are supported on a piece that projects out from the mezzanine.
Warning: Last items in stock!
|Kind of product||Stairs & Ladders|
|Maximum height above the flooring board (mm)||2333|
|Minimum height above the flooring board (mm)||1603|
|Height above the beam (cm)||158, 171, 183, 195, 207, 219, 232|
|Height-adjustable every (mm)||121|
|Maximum load (Kg)||150|
|Material of the steps||European Radiata pine plywood 30 mm thick|
|Incline and shadow||45º|
|Kind of stairs||Lateral|
|Measures of the steps (mm)||393 x 205|
|Height between steps (riser) (mm)||210|
|No. of steps||9|
firstly let me thank you for contacting us and for your interest in Tecrostar products.
Normaly this special beam, that is required to install the lateral stairs parallel to the mezzanine, extends approximately 55 cm.
Although that dimension is the normal one, it can be increased or reduced depending on the specifications of each project.
You can provide us the specific information of your project sending an email to email@example.com. Thus, we will analize it in detail.
Thank you so much!
the lateral stairs kit includes the al the pieces that are needed, including the beam to fix it to the mezzanine. But consider that, if the stairs are going to be installed inside the mezzanine, you will have to add the beam for interior stairs (which is not included in the kit).
Thanks a lot,
it is possible to remove the metal beam and bolt the stairs directly to the existing structure.
This beam is needed when the stairs are being installed parallel to the structure.
Thanks & Regards
tres bon produit .tres facile au montage meme pour un bricoleur moyen. Tres satisfait de mon achat
bon produit manque une marche pour plus de confort,
service livraison impeccable , délais correct
Práctica y sencilla de montaje
El montaje muy sencillo. La pieza de arranque tiene para los 3 diferentes ángulos por lo que no tiene complicación.
Para un angulo de 63º como es mi caso, sin una barandilla o agarre, puede resultar peligroso por la distancia que queda entre los peldaños.
Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.
Personalised phone or email service from our specialists
The stairs can be placed in different positions, increasing the possible configurations
Case 1: Exterior stairs, perpendicular to the mezzanine.
Case 2: Interior stairs. You will need a beam for interior stairs.
Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.
Case 4: A different placement to our mezzanines.
Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details
Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.
If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:
References that have this anchor: 30501, 30401, 31003, 31301, 31102
Referencias que llevan este anclaje: 30303-0
References that have this anchor: 30601, 30801
Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.
To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accident.
When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.
You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)
You can find all the tools required to assemble it and tested by Tecrostar in the tools section.
All the models are installed by following these steps:
Pre-assemble the structure on the floor in the desired area.
Raise the outer structure to the desired height.
Finish assembling the structure and floor.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.
TS8 Mezzanine: 3 hours with 2 people
TM15 Mezzanine: 4 hours with 2 people
TL30 Mezzanine: 5 hours with 3 people
The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 7 and 10 working days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.
If we cannot meet this delivery time, we will contact you.
Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift. The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg). The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.
In most cases, you can.