Descansillo XL
Descansillo XL
  • Descansillo XL
  • Descansillo XL

Stair Landing XL

The Stair Landing XL is an extra space attached to the Mezzanine TXL32 after the last step of the stairs. It allows a more comfortable and secure landing when the stairs are installed outside the mezzanine parallel to any of its sides.

This landing consists of a special column with a support for the primary beam, that is joint to the mezzanine through two small secondary beams. The kit also includes flooring with the exact same features as the one of the mezzanine, provided that the stair landing is 122 cm wide at most. If the width is larger, it would be necessary to acquire an extra flooring board.

Both width and height are telescopic, what helps to adapt it to customer needs. It is 105 cm long and its width varies from 106 to 186 cm. The height of the stair landing can also be adjusted between 235 and 381 cm.

Landing for the stairs in a Mezzanine XL, when the stairs are placed outside the mezzanine parallel to any of its sides. Features:

 

This landing consists of a special column with a support for the primary beam, that is joint to the mezzanine through two small secondary beams. The kit also includes flooring with the exact same features as the one of the mezzanine, provided that the stair landing is 122 cm wide at most. If the width is larger, it would be necessary to acquire an extra flooring board.

Both width and height are telescopic, what helps to adapt it to customer needs. It is 105 cm long and its width varies from 106 to 186 cm. The height of the stair landing can also be adjusted between 235 and 381 cm.

The delivery time is longer than the standard. Consult delivery dates

Preview the shipping fees

546.69 €

tax incl.

Free shipping for orders over 850€

Opiniones de los clientes

Se el primero en dejar una opinión

Accessories

Data sheet

Kind of productStairs & Ladders
RangeExtra Large
CompatibilityExtra Large
Maximum height above the flooring board (mm)3807
Minimum height above the flooring board (mm)2350
Height above the beam (cm)377, 371, 365, 359, 353, 347, 341, 329
Beam height (mm)325
Flooring materialTableros estructurales aglomerados de alta densidad en calidad P4, machihembrados a las 4 caras de 35mm de espesor
Height-adjustable every (mm)121
Width/Lenght-adjustable every (mm)100
Maximum width (mm)1860
Minimum width (mm)1060
Maximum length (mm)1050
Minimum length (mm)1050
Net weight (Kg)88
Gross weight (Kg with packaging)90

Customer questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!

Opiniones de clientes

Customers who bought this product also bought:

FREQUENTLY ASKED QUESTIONS

    What does the kit include?

    Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

    • All the beams and columns
    • The floor panels
    • All the nuts and bolts
    • Wall anchors
    • Assembly manual
    • Anchors for anchoring the columns to the floor

    Personalised phone or email service from our specialists


    Where can I put the stairs?

    The stairs can be placed in different positions, increasing the possible configurations

    Case 1: Exterior stairs, perpendicular to the mezzanine.

    Case 2: Interior stairs. You will need a beam for interior stairs.

    Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.

    Case 4: A different placement to our mezzanines.


    Can the stairs be placed outdoors?

    Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details


    Can the stairs be anchored to a mezzanine or construction wall?

    Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.


    How are the stairs anchored to the top?

    If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:

    Anchor A

    References that have this anchor: 30501, 30401, 31003, 31301, 31102

     

     

    Anclaje B:

    Referencias que llevan este anclaje: 30303-0

     

    Anchor C:

    References that have this anchor: 30601, 30801


    Do they meet the building regulation and can they be used inside a house to access the 2 nd floor?

    It depends on the use. The regulation is for stairs for common use and our stairs are for private use. Our stairs that comply are the 42nd: Long Stair M  and  L Stair


    Can the angle of inclination be changed?

    Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.


    How is it installed?

    To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accident.

    When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.

    You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)

    You can find all the tools required to assemble it and tested by Tecrostar in the tools section.

    All the models are installed by following these steps:

    Pre-assemble the structure on the floor in the desired area.

    Raise the outer structure to the desired height.

    Finish assembling the structure and floor.


    How long does it take to install?

    You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.

    TS8 Mezzanine: 3 hours with 2 people

    TM15 Mezzanine: 4 hours with 2 people

    TL30 Mezzanine: 5 hours with 3 people

    The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.


    What is the delivery time?

    For products in stock (white and black for S, M and L ranges), the delivery time will be approximately 5 working days from placing the order. Once the product has left our facilities, the normal transport time is between 7 and 10 working days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.

    If we cannot meet this delivery time, we will contact you.


    How is the product shipped and received?

    Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).


    How do I get the product up to my home?

    Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.  The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).  The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.


    Can I hire a service to take the material up to my home?

    In most cases, you can.


    Is the XL range delivered differently?

    There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.

    The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).

    We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.