Folding Stairs to wall 54º S
Folding Stairs to wall 54º S

Folding Stairs to wall 54º S

The folding stairs to wall are the ideal solution when you need the stairs flush against wall, but there is not too much space. Thanks to their turning system they are folded and collected, taking the minimum space that possible allowing to use it as a transit area.

The folding stairs to wall are height-adjustable and enable the access to the structures of the S range. They can also be installed independently in any other existing structure, thanks to a really versatile upper anchoring system.

Railing for folding stairs to wall

More details

In Stock

Preview the shipping fees

595.00 €

Tax incl.

Customer ratings and reviews

Nobody has posted a review yet

Accessories

More info

These stairs should be fixed to the wall, using the pieces included in the kit, and to the upper part of the mezzanine with other special fittings that allow their turning movement.

They can be set up so that the wall is on the left or on the right.

A handrail kit is also available to be installed in the opposite side of the wall.

The folding system, guided by an hydraulic cylinder, allows the use by any user in a safe an easy way.

Moreover, the folding stairs to wall have an automatic security system that avoids the unintentional fall from the structure.

The dimensions of the tread and riser can not be modified, so it is not possible to acquire extra steps to reduce the height between them.

Available in two inclinations: 45º and 54º

Data sheet

Type of productStairs & Ladders
RangeSmall
CompatibilitySmall
Maximum height above the flooring board (cm)233
Minimum height above the flooring board (cm)160
Available heights above beams (cm)158, 171, 183, 195, 207, 219, 232
Height-adjustable every (cm)12,1
Incline and shadow54º / The shadow of the stairs is 73% of the height.
Kind of stairsStraight
Measures of the steps (cm)39,3 x 20,5
Going (cm)18
Height between steps (riser) (cm)28
No. of steps8
Material of the stepsSteel painted with powder coating
Net weight (Kg)47
Gross weight (Kg with packaging)49

Reviews

Customer questions (0)

No customer questions for the moment.

Add product questions
Your Question has been successfully sent our team. Thanks for question!

FREQUENTLY ASKED QUESTIONS

    What does the kit include?

    Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

    • All the beams and columns
    • The floor panels
    • All the nuts and bolts
    • Wall anchors
    • Assembly manual
    • Anchors for anchoring the columns to the floor

    Personalised phone or email service from our specialists


    What types of stairs are there in Tecrostar.com?

    You can choose between several types of stairs:

    • Straight stairs

    • Spiral stairs

    • Ladders

    • Retractable ladders

    • Alternating tread stairs


    Where can I put the stairs?

    The stairs can be placed in different positions, increasing the possible configurations

    Case 1: Exterior stairs, perpendicular to the mezzanine.

    Case 2: Interior stairs. You will need a beam for interior stairs.

    Case 3: Exterior stairs, parallel to the mezzanine. You will need a stair landing.

    Case 4: A different placement to our mezzanines.


    Are the stairs compatible with different ranges?

    Yes, provided that the height matches. All our stairs can be located in any of our structures. As the structures, the stairs are height-adjustable. We have several different types of stairs, to ensure the height compatibility with the selected mezzanine.


    Can the stairs be placed outdoors?

    Yes, our products can be installed outdoors, although you should bear in mind a series of special considerations and carry out maintenance of the material to guarantee that they are in good condition. See this section for more details


    Can the stairs be anchored to a mezzanine or construction wall?

    Yes. They can be installed on a surface that is not a Tecrostar surface. The customer must bear in mind that they are responsible for the strength of the joint and structure to which they are anchored.


    How are the stairs anchored to the top?

    If you need to anchor the stairs to a structure that is not a Tecrostar structure, see the following details about the anchors:

    Anchor A

    References that have this anchor: 30501, 30401, 31003, 31301, 31102

     

     

    Anclaje B:

    Referencias que llevan este anclaje: 30303-0

     

    Anchor C:

    References that have this anchor: 30601, 30801


    What stairwell is needed for the electric lift kit?

    The minimum width is 745 mm and the maximum is 1145 mm. The length should be more than 1300 mm.


    Can the electric kit be used to lift non Tecrostar stairs?

    No, it can’t. This kit is specially designed to be used with our staircases.


    Do they meet the building regulation and can they be used inside a house to access the 2 nd floor?

    It depends on the use. The regulation is for stairs for common use and our stairs are for private use. Our stairs that comply are the 42nd: Long Stair M  and  L Stair


    How can I turn the stairs up to allow the transit underneath them?

    The anchor that joins the stairs to the mezzanine can attach the stairs with 4 or 2 screws. If you choose the configuration of just 2 screws, the stairs can pivot. In any case, the stairs have the same resistance.


    Can I vary the direction of rotation of the spiral stairs?

    Yes, the direction of rotation can vary.


    Can the angle of inclination be changed?

    Each model of stairs has an inclination and it cannot be changed unless otherwise stated. You must choose the stairs that best suit your needs.


    Can I add extra steps?

    The stairs include the maximum number of steps that are required in their maximum heights. The more the height is reduced, the less steps will be installed. However, you can acquire additional steps as spare parts, the number of steps is designed according to the inclination of each staircase though. An excessive number of steps would reduces the going available for treading, specially important when going down.


    Can the railing of the stairs be taken off?

    Yes, the railing of both sides of the stairs is removable and, therefore, it can be taken off. However, Tecrostar recommends to instal it for security and because they provide rigidity to the stairs as well. On the other hand, the stairs include the railing; it is not possible to acquire them without the railing.


    Can the spiral stairs be installed inside the mezzanine?

    Yes. You will have to acquire the beam for interior stairs.


    How much weight do the steps support?

    Check the the table with the specifications of each staircase to get this information.


    Can I buy the stairs with just one side of railing?

    No, you can’t.


    How is it installed?

    To install Tecrostar mezzanines you need 2 adults (they do not need to be DIY experts). It is recommendable to use personal safety equipment like gloves, boots, etc. in order to avoid accident.

    When installing range L mezzanines you may need to use some type of scaffolding or ladder for working at heights and manual or electric lifting machinery to raise the primary beams, particularly if the structure is more than 3m high. The other ranges can be lifted easily by hand.

    You will need the following tools to install the mezzanines: tape measure, some type of spanner for m10 and m8 bolts and a screwdriver (an electric screwdriver will make the task much easier), spirit level, drill and a tool for cutting the panels (saw, jigsaw, circular saw, etc.)

    You can find all the tools required to assemble it and tested by Tecrostar in the tools section.

    All the models are installed by following these steps:

    Pre-assemble the structure on the floor in the desired area.

    Raise the outer structure to the desired height.

    Finish assembling the structure and floor.


    How long does it take to install?

    You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product.

    TS8 Mezzanine: 3 hours with 2 people

    TM15 Mezzanine: 4 hours with 2 people

    TL30 Mezzanine: 5 hours with 3 people

    The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.


    What is the delivery time?

    Once the payment is received, the dispatch time will be 5 working days. Once the product has left our facilities, the normal transit time is from 7 to 10 working days. The transport time varies greatly and is difficult to control due to many factors: Place of delivery, local holidays, customs, etc.

    If we cannot meet this delivery time, we will contact you.


    How is the product shipped and received?

    Mezzanines are shipped in boxes by an external company in a lorry with a tail lift that enables the box to be unloaded to the ground (at street level at the customer’s address).


    How is the package and what are its dimensions?

    Depending on your order you can receive different packages: One box for the mezzanines of the S and M ranges or two boxes for L mezzanines.

    Length: 239 cm

    Width: 112 cm

    Height: 54 cm

    The stairs can share the box with the mezzanines if the are purchased at the same time or you can have a separate box for the stairs. Check the stairs section.


    How do I get the product up to my home?

    Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift.  The heaviest components are the primary beams from the L range (39 kg), the rest of the ranges are considerably lighter (12kg).  The floor panels are very light and fit in any lift. No component is more than 2.4m long and therefore, fits in most lifts.


    Can I hire a service to take the material up to my home?

    In most cases, you can.


    Is it delivered on Saturdays?

    No


    Is it delivered in metropolitan areas such as Madrid/ Paris/London?

    Yes


    Stair comparison

    Characteristics of the materials

    Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

    • The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
    • Structure hardware grade 8.8
    • Anodized aluminium apt for outdoor use
    • The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
    • Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

    TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados

Customers who bought this product also bought: